Fiber-Lok Rug Backing
Natural Rubber – Easy To Apply – Keeps Rugs Where They Belong !
- For your safety, prevents rugs from sliding and skidding
- Ideal for latch-hook, punch rugs and wall hangings
- Revives old rugs and helps them last years longer
- Machine washable and dry-able
- Prevents unraveling and loosening of fibers and canvas
Available in two convenient sizes, they are – 16oz. (473ml) and 32oz. (946ml).
|00876||16 oz||Approximately 15 square feet|
|00878||32 oz||Approximately 30 square feet|
|00880||1 Gallon||Approximately 120 square feet|
Directions for use:
fiber-lok may be applied to new and old rugs. Old rugs should be cleaned and dried. Remove any loose, flaky non-skid backing. Place rug, wall hanging or tapestry face down on a flat surface. (Protect workspace with newspaper or plastic sheet). Trim side selvage and corners to 1-1/2″ to 2″. Fold selvage toward back side of rug and secure with T-pins.
Simply brush the back side with a thin, even coat of fiber-lok. Two thin coats are better than one heavy application. fiber-lok will appear transparent when it is dry and ready to re-coat. The second coat should be applied within 12 hours of the first. Clean your brush with soap and cold water. Allow 1 week before washing rug. DO NOT dry clean rugs treated with fiber-lok or clean with a product that contains solvents. fiber-lok may slip on a wet surface.