Crystal Sheen

Crystal Sheen High Gloss Polymer Coating is an extremely clear, tough, high gloss surface coating formulated to produce a deep glass like appearance in a single layer on a sealed surface. Two or more layers are often applied for added depth and protection. Crystal Sheen has an extended “open time” which allows up to 5 minutes in the mixing container at 70º F and up to 30 minutes working time on the surface being coated.

Crystal Sheen Polymer Coating is waterproof, heat & alcohol resistant.

Flood Coat Calculator Tool
(Quickly find out how much product you will need for your project)

Used commercially on restaurant table & bar tops for over 40 years!

General Crystal Sheen is an extremely clear tough high gloss surface coating formulated to produce a deep gloss appearance.
A/B Mix Ratio 1:1
Thin Film Set Time/Hour 7
Durometer Hardness
2 Hours @ 60º C)
80
Tensile Strength 1887
Tensile Modulus 32,700
Tensile Elongation % 78
Flexural Yield Strength 676
Flexural Yield Strain 6.5
Flexural Yield Modulus 38,447
Tg - ºC 46
Viscosity CPS @ 77º F:
Resin (A)
Hardener (B)
2660
450
Density (lbs/gal):
Resin (A)
Hardener (B)
9.45
7.96
Gel Time (minutes)
(100 gram mass @ 22º C)
28 +/-

READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) BEFORE USING THIS PRODUCT.