Create a Marble Like Finish with Envirotex Lite !

Create a marble like finish with Envirotex Lite,a little paint and a wide brush.An Ideal finish for bar tops & table tops! Perfect for decorative items as well. Envirotex Lite can be used over existing finishes, on wood, glass, metal, paper, plastics.Once cured, Envirotex Lite is water, chemical, and heat resistant.

Green Marble, use Green as base, White, Black and Gray as vein colors.

White Marble, use off White as base, Gray, Black and Brown as vein colors.

Brown Marble, use med. Brown as base, dark Brown, Black and White for vein colors.

Rose Marble, use Dusty Rose as base, Off White, Pink and Gray as vein colors.

Step 1: Paint surface area with base color and allow to dry.

Step 2: Mix Envirotex Lite according to package instructions, then blend in your base paint color. Add just enough paint to turn the mixture opaque. Note: To much paint can result in a soft finish. Pour over entire surface area.

Step 3: Mix another small mixture of Envirotex Lite, approximately 1/4 of what was used prior as a base coat. Once mixed, split contents equally between three containers. Add vein colors and mix well.

Step 4: Pour colored mixtures in diagonal lines randomly placed across your work area

Step 5: Using a 3” brush, very lightly comb the surface directly over these lines.

Step 6: Move your brush around in wavy patterns. This procedure will mix the three colors together. Note: To much combing may result in Muddy colors.

Final Step: Once the marbled Envirotex Lite surface has cured for 24 hours, apply a clear coat of Envirotex Lite over the entire surface. This will add protection and depth.