Castin'Craft Clear Polyester Casting Resin (Bulk)
Our clear liquid plastic casting resin is designed for casting or embedding objects. For best casting results, this product should be poured into self releasing polypropylene or polyethylene molds. Always work in a well ventilated area with a temperature of 65º to 75º F. Storage: casting resin should be stored in a cool dark area. Do not place in an area where freezing may occur.
Note: Casting Resin requires a catalyst curing agent. When ordering Casting Resin, order 1 ounce of Catalyst per 1 gallon of Casting Resin.
Clear Casting Resin – available in 1 gallon and 50 gallon containers.
Casting Resin Catalyst – Bulk
Available in 1oz. or 1 gallon containers.
|TYPICAL RESIN PROPERTIES @ 77°F RESULTS|
|Brookfield Viscosity. (RV) #2 @ 20 rpm||400 – 600|
|Catalyst %, DDM-9||1.0|
|Gel Time, min:sec||14:00 – 25:00|
|Gel to Peak Time, min:sec||35:00 – 60:00|
|Peak Exotherm °F (°C)||175–225 (79-107)|
|Solids %||62.0 – 64.5|
MECHANICAL PROPERTIES OF NEAT CURED RESIN RESULTS
|Property:||ASTM Test Method||Psi||Mpa|
|Flexural Modulus||D-790||7.32 x 105||5048|
|Tensile Modulus||D-638||7.17 x 105||4945|
|Tensile Elongation, %||D-638||1.5||1.5|
|Heat Distortion Temperature||D-648||115 °F / 46.1 °C|
|Hardness, Barcol 934-1||D-2583||38 - 42|
All specifications and properties specified above are approximate. Specifications and properties of material may vary slightly from those given above. Environmental Technology Inc. makes no representations of fact regarding the material except those specified above. Final determination of the suitability of the material for the use contemplated is the sole responsibility of the buyer.