• Match up the other three ends and tie a square knot to hold threads in place. (See Figure #4)
• Take one strand and pass through a hole in the 3” bamboo ring. Adjust the length of this strand to about 8” between the curtain ring and bamboo ring. Make an overhand knot to keep the ring from sliding on the thread. (See Figure #5)
• Repeat the same process with the other five strands, working your way around the ring. Take care to keep the lengths of thread between the curtain ring and bamboo ring even.
• Allowing a 6” drop-from the 3” ring to the 4” ring-take one strand of thread and pass through a hole in the 4” ring. Tie an overhand knot. Skip a thread and repeat with the next strand. (See Figure #6) Skip another thread and repeat with the next strand. Bring the remaining 3 loose strands to the inside of the rings before adding butterfly discs.

ASSEMBLING WIND CHIME

• Starting with one strand, pass thread through hole in a flower or butterfly disc. Tie a double knot to secure. Pass the end of this same thread through a second disc and space so the two discs barely touch. Tie a double knot to secure and clip off surplus thread. (See Figure #7)
• Repeat above with next thread and add two discs.
• Work your way around the rings until two discs have been added to each thread in a spiral fashion.